Fra og med fredag den 3. juli 2026 lukker kontoret kl. 16.30 om fredagen. Mandag til torsdag er kontakttiden i salg uændret fra kl. 09.00 til 17.00, mens kontakttiderne for bogholderi, indkøb og RMA generelt er uændrede.
For at se vores fulde sortiment, priser og opnå den fulde adgang til vores webshop, skal du logge ind.
Log ind på din konto her eller registrer dig som kunde her.
Anycubic Kobra 3 Max Combo 3D-Printer
Anycubic Kobra 3 Max Combo - 3D-Printer - Automatisk nivellering - 4-8 farver - Printvolumen: 420 x 420 x 500 mm
Informationer/specifikationer på siden er vejledende og kan uden varsel være ændret af producenten. Der tages forbehold for trykfejl og vejledende billeder.
Specifikationer
|
Multicolor Printing
|
Supports 4- or 8-color printing
|
|
Printing Volume
|
420 x 420 x 500 mm (88L)
|
|
Supporting Filaments
|
PLA, PETG, TPU (95A) (TPU 95A is not compatible with the ACE Pro)
|
|
Printing Speed
|
Recommended 300 mm/s, Maximum 600 mm/s
|
|
Acceleration
|
Maximum 10,000 mm/s²
|
|
Nozzle Specs
|
Max Temperature 300°C, Diameter Standard 0.4 mm, expandable to 0.6 / 0.8 mm
|
|
Hotbed Specs
|
Max Temperature 90°C, Material PEI spring steel build plate
|
|
Firmware solution
|
Kobra OS
|
|
Construction
|
Gantry System
|
|
Extruder Type
|
Short distance extrusion
|
|
Motion System X-axis
|
Dual shaft core + SG15 bearings
|
|
Motion System Y-axis
|
Dual shaft core + SG15 bearings + dual motor
|
|
Motion System Z-axis
|
Dual motor dual screw
|
|
Machine Leveling
|
LeviQ3.0 Auto-leveling, Z-Offset
|
|
Pressure Advance / Flow Calibration
|
Supported
|
|
Power Loss Resume
|
Supported
|
|
Filament Detection & Auto Resume
|
Supported
|
|
Filament Entanglement Detection
|
Supported
|
|
AI Spaghetti Detection
|
Supported
|
|
Object-Skip & Area Leveling
|
Supported
|
|
Control & Print Methods
|
Via printer, slicing software, Anycubic APP, USB (print only)
|
|
Touchscreen
|
4.3-inch capacitive touch screen
|
|
Noise
|
≤60dB (Standard mode)
|
|
Machine Weight
|
Kobra 3 Max - 19kg, ACE Pro - 4.6kg
|
|
Machine dimensions
|
Kobra 3 Max 706 x 640 x 753 mm, ACE Pro 365.94 x 282.84 x 234.5 mm
|
|
Included
|
Crane Frame, Printhead, Touchscreen, Spool Holder, Printer Lower, Pouch 1- For Crane Installation, Pouch 2 - For Support Rod Installation, Pouch 3 - For Printhead Cable, Pouch 4 - For Printhead Installation, Pouch 5 - For Screen Installation, Pouch 6 - For Spool Holder Installation, Wrench (1 set), Support Rod, Cable Holder, Power Cord (2pcs), Filament Tube (5pcs), Organizer , Filament Sample, Hex keys 4.0/3.0/2.5/2.0/1.5, U-DISK, Nozzle Cleaner, Grease
|
