|
Produktbeskrivelse
|
Startech 2.5" to 3.5" SATA HDD/SSD Adapter Enclosure - External Hard Drive Converter with HDD/SSD Height up to 12.5mm (25SAT35HDD) - lagringspakning - SATA 6Gb/s - SATA 6Gb/s
|
|
Enhedstype
|
Lagringspakning - intern
|
|
Bustype
|
SATA 6Gb/s
|
|
Udvidelses-båse
|
1 x intern - 2.5" x 1/8H
|
|
Kompatibel bås
|
1 3.5" x 1/3H
|
|
Harddiskens formfaktorkompatibilitet
|
2.5"
|
|
Understøttet grænseflade
|
SATA-600
|
|
Drev connector
|
22-pin Serial ATA
|
|
Bay connector
|
22-pin Serial ATA
|
|
Interface
|
SATA 6Gb/s
|
|
Dataoverførselshastighed
|
6 Gbit/s
|
|
Understøttede enheder
|
Harddisk, solid state drev
|
|
Produktmateriale
|
Plastik, aluminium
|
|
Dimensioner (B x D x H)
|
10.2 cm x 14.6 cm x 3.6 cm
|
|
Vægt
|
260 g
|
|
Producentgaranti
|
2 års garanti
|
|
Designet for
|
P/N: S352BU33HR
|
Effective Friday, July 3, 2026, the office will close at 4:30 PM on Fridays. From Monday to Thursday, Sales contact hours remain unchanged from 9:00 AM to 5:00 PM, while contact hours for Accounting, Purchasing, and RMA remain unchanged in general.
To gain full access to our webshop, find our entire product range and see our prices, you need to be logged in.
Log in to your account here or sign up as a customer here.
StarTech.com Intern Lagringspakning SATA 6Gb/s SATA 6Gb/s
Startech 2.5" to 3.5" SATA HDD/SSD Adapter Enclosure - External Hard Drive Converter with HDD/SSD Height up to 12.5mm (25SAT35HDD) - Lagringspakning - 2.5" - SATA 6Gb/s - SATA 6Gb/s - for P/N: S352BU33HR
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
Specifications
Full specifications
|
General
|
|
|---|---|
|
Device Type
|
Storage enclosure - internal
|
|
Hard Drive Form Factor Compatibility
|
2.5"
|
|
Host Bus
|
SATA 6Gb/s
|
|
Product Material
|
Plastic, aluminum
|
|
Supported Interface
|
SATA-600
|
|
Storage Controller
|
|
|
Data Transfer Rate
|
6 Gbit/s
|
|
Interface
|
SATA 6Gb/s
|
|
Supported Devices
|
Hard drive, solid state drive
|
|
Expansion / Connectivity
|
|
|
Bays
|
1 x internal - 2.5" x 1/8H
|
|
Compatible Bay
|
1 x internal 3.5" x 1/3H
|
|
Connections
|
1 - 22 pin Serial ATA
|
|
Interfaces
|
1 x SATA 6Gb/s
|
|
Miscellaneous
|
|
|
Cables Included
|
1 x Serial ATA cable
|
|
Compliant Standards
|
FCC, RoHS
|
|
Features
|
Tested with up to 1TB 7200 RPM 2.5" hard drives
|
|
Manufacturer Warranty
|
|
|
Service & Support
|
Limited warranty - 2 years
|
|
Dimensions & Weight
|
|
|
Depth
|
14.6 cm
|
|
Height
|
3.6 cm
|
|
Weight
|
260 g
|
|
Width
|
10.2 cm
|
|
Dimensions & Weight (Shipping)
|
|
|
Shipping Depth
|
16.3 cm
|
|
Shipping Height
|
3.8 cm
|
|
Shipping Weight
|
260 g
|
|
Shipping Width
|
11.5 cm
|
|
Environmental Parameters
|
|
|
Humidity Range Operating
|
5 - 85%
|
|
Max Operating Temperature
|
55 °C
|
|
Min Operating Temperature
|
5 °C
|
|
Compatibility Information
|
|
|
Designed For
|
P/N: S352BU33HR
|
Media
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
The 25SAT35HDD 2.5" to 3.5" hard drive adapter enclosure turns a 2.5" SATA hard drive (HDD) or solid state drive (SSD) into a 3.5" drive.
The adapter enclosure lets you substitute a 3.5" hard drive for a 2.5" SSD/HDD in any application that would typically require a 3.5" drive, such as desktop chassis, backplane, or docking station. The enclosure has the same dimensions as a standard 3.5" hard drive, including mounting points, and SATA connector locations.
With support for drives up to 12.5 mm in height, and high-capacity SATA I/II/III drives (tested up to 1 TB) this HDD adapter ensures compatibility with virtually any 2.5" SATA hard drive or solid state drive.
The 25SAT35HDD is backed by a StarTech.com 2-year warranty and free lifetime technical support.
.jpg)
Support
Send en E-mail til vores support
Før køb: [email protected]
Efter køb: [email protected]
Er varen fejlbehæftet og overholder vores reklamations-bestemmelser, skal der oprettes en RMA-sag i vores RMA-system på https://dev.dcs.dk/en/profile/rma/.
Har du spørgsmål vedr. RMA oprettelse, bedes du sende en mail, direkte til vores RMA afdeling: [email protected]
Før køb: [email protected]
Efter køb: [email protected]
RMA
Hvis du har købt en vare hos os, som mod forventning er defekt og du ønsker at reklamere over den, skal vi have den ind til vores tekniske afdeling for undersøgelse, før afhjælpning kan foretages. Vores reklamationsbehandlingstid er normalt 2-14 dage. Ved udgåede modeller tages forbehold for at producenten / vores leverandør, ikke kan overholde vores normale reklamationstid.Er varen fejlbehæftet og overholder vores reklamations-bestemmelser, skal der oprettes en RMA-sag i vores RMA-system på https://dev.dcs.dk/en/profile/rma/.
Har du spørgsmål vedr. RMA oprettelse, bedes du sende en mail, direkte til vores RMA afdeling: [email protected]