StarTech.com IDE to SATA Hard Drive or Optical Drive Adapter Converter - 40-Pin PATA to 2.5" SATA HDD / SSD / ODD Converter (IDE2SAT2) - lagringskontrol - SATA 1.5Gb/s - Ultra ATA/133 |
Lagringskontrol |
Ultra ATA/133 |
SATA 1.5Gb/s |
133 MBps |
Harddisk, Cd-drev, DVD-drev |
1 |
1 |
2 cm x 7.55 cm x 2.3 cm |
15 g |
2 års garanti |
General
|
Storage controller |
Ultra ATA/133 |
Storage Controller
|
1 |
133 MBps |
SATA 1.5Gb/s |
1 |
Hard drive, CD drive, DVD drive |
Expansion / Connectivity
|
1 - 40 pin IDC |
1 x SATA 1.5Gb/s - SATA combo |
Miscellaneous
|
1 x power cable |
FCC, RoHS |
Manufacturer Warranty
|
Limited warranty - 2 years |
Dimensions & Weight
|
7.55 cm |
2.3 cm |
15 g |
2 cm |
Connect your SATA Hard Drive or Blu-ray/DVD/CD-ROM Drive to an IDE motherboard
The IDE2SAT2 40-pin IDE to SATA adapter enables you to connect a SATA I/II/III drive to an available IDE/ATA 33/66/100/133 motherboard port - a cost effective solution that allows you to add newer SATA drives, and keep your existing motherboard.Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, or CD-ROM drives to an older IDE motherboard.Product Features and Applications
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
- Support for 48-bit Logical Block Addressing (LBA)
- Compliant with SATA revision 1.0 specification
- Compatible with Ultra ATA 133 specification
- Supports 2.5", 3.5", and 5.25" SATA Drives
- ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives
- An internal solution for connecting your SATA hard drive to a motherboard supporting an IDE interface
- Ideal for use with older motherboards that do not support SATA
Send en E-mail til vores support
Før køb:
[email protected]
Efter køb:
[email protected]
RMA
Hvis du har købt en vare hos os, som mod forventning er defekt og du ønsker at reklamere over den, skal vi have den ind til vores tekniske afdeling for undersøgelse, før afhjælpning kan foretages. Vores reklamationsbehandlingstid er normalt 2-14 dage. Ved udgåede modeller tages forbehold for at producenten / vores leverandør, ikke kan overholde vores normale reklamationstid.
Er varen fejlbehæftet og overholder vores reklamations-bestemmelser, skal der oprettes en RMA-sag i vores RMA-system på https://dev.dcs.dk/en/profile/rma/.
Har du spørgsmål vedr. RMA oprettelse, bedes du sende en mail, direkte til vores RMA afdeling:
[email protected]