StarTech.com Cisco SFP-H10GB-CU2M Compatible 2m 10G SFP+ to SFP+ Direct Attach Cable Twinax, 10GbE SFP+ Copper DAC 10 Gbps Low Power Passive Transceiver Module DAC, Cisco Firepower ASR920 - Lifetime Warranty (SFPCMM2M) - direkte påsætning-kabel - 2 m |
Direkte påsætning-kabel |
Dobbelt-axial |
Latching tilslutninger |
2 m |
SFP+ |
SFP+ |
Begrænset livtidsgaranti |
P/N: ET10GSFP, PEX10000SFPI, PEX10GSFP4I, PEX20000SFPI |
General
|
30 |
Latching connectors |
100 Ohm |
PVC |
2 m |
Direct attach cable |
Twinaxial |
Connectivity
|
SFP+ |
SFP+ |
Miscellaneous
|
RoHS |
Manufacturer Warranty
|
Limited lifetime warranty |
Environmental Parameters
|
70 °C |
0 °C |
Compatibility Information
|
P/N: ET10GSFP, PEX10000SFPI, PEX10GSFP4I, PEX20000SFPI |
2m Cisco Compatible SFP+ 10-Gigabit Ethernet (10GbE) Twinax Direct Attach Cable
The SFPCMM2M Cisco Compatible 2m SFP+ cable is a fully hot pluggable, direct attach cable, supporting 10 Gigabit Ethernet and Fiber Channel applications connected through (Small Form Factor Pluggable) SFP+ ports.
Designed for short length, high speed interconnects, this low power, low latency Twinax cable is a cost-effective alternative to fiber optic cable assemblies and is intended for short distance applications such aspoint-to-point in-rack and across rack network switch/server connections. Backed by our lifetime warranty, this 10GBASE-CU SFP+Cable is compliant with MSA (Multi-Source Agreement) standards, making it a reliable replacement SFP-H10GB-CU2M cable.Product Applications
• Use in 10Gb Ethernet and Fiber Channel applications • Point-to-point in-rack and across rack network switch/server connections (Storage Area Networks (SAN), Network Attached Storage (NAS), Storage Servers, etc.)
StarTech.com Advantages
• Cost-effective alternative to fiber optic modules • Guaranteed reliability
Product Features
- Compatible with Cisco equipment
- Compliant with SFP+ MSA Multi-Source Agreement standards
- Support for 1x, 2x, 4x and 8x Fiber Channel data rates
- Compliant with SFF 8431 connector standards
- 30AWG, 100 Ohm impedance
- Support for multi-gigabit data rates up to 10.5Gbps
- Hot-swappable with fiber optic modules
- Low Power consumption <0.5W
- Quick release latching SFP+ connectors
Send en E-mail til vores support
Før køb:
[email protected]
Efter køb:
[email protected]
RMA
Hvis du har købt en vare hos os, som mod forventning er defekt og du ønsker at reklamere over den, skal vi have den ind til vores tekniske afdeling for undersøgelse, før afhjælpning kan foretages. Vores reklamationsbehandlingstid er normalt 2-14 dage. Ved udgåede modeller tages forbehold for at producenten / vores leverandør, ikke kan overholde vores normale reklamationstid.
Er varen fejlbehæftet og overholder vores reklamations-bestemmelser, skal der oprettes en RMA-sag i vores RMA-system på https://dev.dcs.dk/en/profile/rma/.
Har du spørgsmål vedr. RMA oprettelse, bedes du sende en mail, direkte til vores RMA afdeling:
[email protected]