To gain full access to our webshop, find our entire product range and see our prices, you need to be logged in.
Log in to your account here or sign up as a customer here.
Log in to your account here or sign up as a customer here.
Anycubic PETG Filament 1.75mm 1kg Tekstureret Grå AHPEGY-102
Anycubic PETG - tekstureret grå - 1 kg - PETG filament (3D)
-
Product no 1004284107
Model AHPEGY-102
Brand ANYCUBIC
EAN 6974662352941
Weight kg
-
Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
| Produktbeskrivelse | Anycubic PETG - tekstureret grå - 1 kg - PETG filament |
| Produkttype | PETG filament |
| Tørring | Krævet før printning |
| Drying Condition | 55-65 °C, 6-8 h |
| ACE Compatibility | Compatible |
| Nozzle | Mindst 0.2 mm |
| Print Temperatur | 230-250 ℃ |
| Heated Bed Temperature | 60-70 ℃ |
| Recommended Printing Speed | 50-250 mm/s |
| Maximum Volume Speed (Flow Rate) | 12 mm³/s |
| Density | 1.23 g/cm³ |
| Melt Index | 25±3 g/10 min (250℃/2.16kg) |
| Melting Point Temperature | 130 ℃ |
| Vicat Softening Temperature | 72 ℃ |
| Young's Modulus | 1850±100 Mpa |
| Tensile Strength | 52±1 Mpa |
| Elongation at Break | 13±1% |
| Bending Modulus | 2000±50 Mpa |
| Bending Strength | 80±2 MPa |
| Tensile Strength (Z) | 31±3 MPa |