EN   DA   SV
To gain full access to our webshop, find our entire product range and see our prices, you need to be logged in.
Log in to your account here or sign up as a customer here.

StarTech.com Intern Lagringspakning SATA 6Gb/s SATA 6Gb/s

Startech 2.5" to 3.5" SATA HDD/SSD Adapter Enclosure - External Hard Drive Converter with HDD/SSD Height up to 12.5mm (25SAT35HDD) - Lagringspakning - 2.5" - SATA 6Gb/s - SATA 6Gb/s - for P/N: S352BU33HR

  • Product no 988493454

    Model 25SAT35HDD

    Brand StarTech.com

    EAN 0065030854856

    Weight 0.26 kg

  • Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
Størrelse 8,89 cm (3.5")
Type Opbevaring drev bakke
General
Device Type Storage enclosure - internal
Hard Drive Form Factor Compatibility 2.5"
Host Bus SATA 6Gb/s
Product Material Plastic, aluminum
Supported Interface SATA-600
Storage Controller
Data Transfer Rate 6 Gbit/s
Interface SATA 6Gb/s
Supported Devices Hard drive, solid state drive
Expansion / Connectivity
Bays 1 x internal - 2.5" x 1/8H
Compatible Bay 1 x internal 3.5" x 1/3H
Connections 1 - 22 pin Serial ATA
Interfaces 1 x SATA 6Gb/s
Miscellaneous
Cables Included 1 x Serial ATA cable
Compliant Standards FCC, RoHS
Features Tested with up to 1TB 7200 RPM 2.5" hard drives
Manufacturer Warranty
Service & Support Limited warranty - 2 years
Dimensions & Weight
Depth 14.6 cm
Height 3.6 cm
Weight 260 g
Width 10.2 cm
Dimensions & Weight (Shipping)
Shipping Depth 16.3 cm
Shipping Height 3.8 cm
Shipping Weight 260 g
Shipping Width 11.5 cm
Environmental Parameters
Humidity Range Operating 5 - 85%
Max Operating Temperature 55 °C
Min Operating Temperature 5 °C
Compatibility Information
Designed For P/N: S352BU33HR
Send en E-mail til vores support
Før køb: [email protected]
Efter køb: [email protected]

RMA

Hvis du har købt en vare hos os, som mod forventning er defekt og du ønsker at reklamere over den, skal vi have den ind til vores tekniske afdeling for undersøgelse, før afhjælpning kan foretages. Vores reklamationsbehandlingstid er normalt 2-14 dage. Ved udgåede modeller tages forbehold for at producenten / vores leverandør, ikke kan overholde vores normale reklamationstid.

Er varen fejlbehæftet og overholder vores reklamations-bestemmelser, skal der oprettes en RMA-sag i vores RMA-system på https://dev.dcs.dk/en/profile/rma/.

Har du spørgsmål vedr. RMA oprettelse, bedes du sende en mail, direkte til vores RMA afdeling: [email protected]