X

Guides

PC-configurator
Register Login
 EN   DA   SV
To gain full access to our webshop, find our entire product range and see our prices, you need to be logged in.
Log in to your account here or sign up as a customer here.
  1. Front page
  2. Other Products
  3. Components
  4. Controller Cards

StarTech.com SATA to USB Cable - USB 3.0 to 2.5" SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB) Lagringskontrol

Startech SATA to USB Cable - USB 3.0 to 2.5" SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB) - Lagringskontrol - 2.5" - SATA 6Gb/s - USB 3.0

  • Product no 988493464

    Model USB3S2SAT3CB

    Brand StarTech.com

    EAN 0065030854696

    Weight 0.06 kg

  • Product information and specifications are guiding only. Without notice, these can be subject to change by the manufacturer. This applies for product images as well.
Produktfarve Sort
General
Device Type Storage controller - external
Hard Drive Form Factor Compatibility 2.5"
Host Bus USB 3.0
Storage Controller
Data Transfer Rate 6 Gbit/s
Interface SATA 6Gb/s
Processor ASMedia ASM1051E
Supported Devices Hard drive, solid state drive
Expansion / Connectivity
Connections 1 x USB 3.0 - 9 pin USB Type B
Interfaces 1 x SATA 6Gb/s - SATA combo
Miscellaneous
Cables Included 1 x USB cable - external
Compliant Standards FCC, RoHS
Software / System Requirements
OS Required Linux, Apple MacOS X, Microsoft Windows Server 2008 R2, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2003 (32/64-bits), Windows 8 (32/64 bits), Windows 8.1 (32/64
Manufacturer Warranty
Service & Support Limited warranty - 2 years
Dimensions & Weight
Depth 50 cm
Height 1 cm
Weight 189 g
Width 4.5 cm
Environmental Parameters
Humidity Range Operating 40 - 85%
Max Operating Temperature 60 °C
Min Operating Temperature 0 °C
Product image
slide {0} of {1}, zoom in, Product image1:53
slide {0} of {1}, zoom in, Product image
slide {0} of {1}, zoom in, Product image
slide {0} of {1}, zoom in, Product image
slide {0} of {1}, zoom in, Product image
slide {0} of {1}, zoom in, Product image
slide {0} of {1}, zoom in, Product image
slide {0} of {1}, zoom in, Product image

An external drive adapter that gives you quick and easy access to a SATA drive through the USB-A port on a laptop

Upgrade the Drive on Your Laptop
Faster Transfer Speeds with UASP
Connect from Anywhere

Upgrade the Drive on Your Laptop

This SATA solid-state (SSD) or hard drive (HDD) adapter lets you upgrade to an external 2.5" SATA SSD or HDD.

The cable lets you:
  • Add drive space
  • Perform backups
  • Create disk images
  • Implement data recovery
  • Transfer content between the drive and the laptop

Faster Transfer Speeds with UASP

The cable supports USB 3.0 data transfer speeds of 5Gbps. But, you can experience transfer speeds up to 70% faster than conventional USB 3.0, when connected to a computer that also supports UASP.

With UASP you can utilize the full potential of a SATA III SSD or HDD. UASP is supported in Windows 8, Mac OS X (10.8 or above), and Linux.

In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

Connect from Anywhere

The SATA to USB cable is a portable solution that tucks away nicely in a laptop bag -- no external power is required.

The cable lets you easily swap between drives with no need to install the drive inside an enclosure. It’s plug-and-play and doesn’t require drivers.
Product image
Product image
Send en E-mail til vores support
Før køb: [email protected]
Efter køb: [email protected]

RMA

Hvis du har købt en vare hos os, som mod forventning er defekt og du ønsker at reklamere over den, skal vi have den ind til vores tekniske afdeling for undersøgelse, før afhjælpning kan foretages. Vores reklamationsbehandlingstid er normalt 2-14 dage. Ved udgåede modeller tages forbehold for at producenten / vores leverandør, ikke kan overholde vores normale reklamationstid.

Er varen fejlbehæftet og overholder vores reklamations-bestemmelser, skal der oprettes en RMA-sag i vores RMA-system på https://dev.dcs.dk/en/profile/rma/.

Har du spørgsmål vedr. RMA oprettelse, bedes du sende en mail, direkte til vores RMA afdeling: [email protected]